Blog

Commercial window replacement | Sleaford

When glass-only is not enough. Upgrade the complete window system.

Dortech Architectural Systems worked with TSK Group to replace approximately 217m² of ageing commercial windows at a retail property in Sleaford, improving winter insulation, summer solar control and the consistency of the building envelope.

The original single-glazed, non-thermally broken aluminium windows were draughty and in poor condition, so a complete replacement strategy was chosen.

217m² replacement package
Thermally broken aluminium
Solar control to southerly elevations
Commercial retail property in Sleaford after the window and glazing replacement works
A coordinated window-and-glass upgrade designed around the different demands of winter and summer.

Project partner
TSK Group

Delivered within a wider commercial refurbishment relationship.

Window area
217m²

Full removal and replacement of the underperforming window systems.

Window U-value
6.0 → 1.4

Approximately 77% lower conductive heat loss by comparison.

Solar factor
0.85 → 0.33

Approximately 61% less solar transmission on treated elevations.

The building-performance challenge

Cold and draughty in winter. Overheating on the south side in summer.

The original vertical sliding sash windows combined single glazing with aluminium frames that had no effective thermal break. They were in poor repair, allowed excessive heat loss and contributed to uncomfortable conditions close to the window line during colder weather.

On the southerly elevations, a high g-value also allowed excessive solar energy into the building. The solution therefore needed to improve both the frames and the glass rather than treating only one part of the problem.

Renewed appearance

A consistent contemporary aluminium system replaces tired and visibly ageing windows.

Better year-round comfort

Improved frames reduce cold and draughts while solar-control glass helps manage summer heat.

Lower energy demand

The package reduces heat loss and can ease cooling demand on elevations exposed to strong sun.

Why full replacement?

The condition of the frames made glass-only reglazing the wrong answer.

Retaining existing frames is often a strong refurbishment strategy when they remain sound and suitable. At Sleaford, however, the original frames were non-thermally broken, draughty and in poor repair. New glass alone would not have corrected those limitations.

Dortech therefore developed a full replacement package that dealt with the complete window assembly—frame, glass, seals, interfaces and operation.

The replacement strategy

Thermally broken aluminium with elevation-specific glazing.

New thermally broken aluminium windows improved insulation and helped reduce cold bridging through the frames. On the southerly elevations, double-glazed units incorporating Saint-Gobain COOL-LITE XTREME 70/33 II and argon-filled cavities were used to reduce unwanted solar gain.

The result was a coordinated specification responsive to orientation, rather than a one-size-fits-all approach.

Measured specification improvement

Better frames, better glass and a more stable internal environment.

Whole-window U-valueApprox. 6.0 → 1.4 W/m²K

Existing77% lower heat loss
Solar factor / g-value0.85 → 0.33

Existing61% less transmission
Visible light transmission90% → 70%

ExistingStrong daylight retained
User comfort

A building envelope that works harder in both seasons.

During winter, the lower U-value and improved frame construction help reduce cold perimeter conditions and the rate of heat loss. During summer, the lower g-value on the most exposed elevations helps reduce overheating before that heat enters the occupied space.

These benefits support a more usable commercial environment and reduce the burden placed on the building’s heating and cooling arrangements.

Indicative annual impact

Approximately £4,061 to £6,019 in modelled annual savings.

The assessment indicated approximately £2,909 per year of heating-side savings. Cooling-side savings were modelled at approximately £1,152 to £3,110 per year if the full 217m² were treated as the illustrative maximum solar-control area.

Indicative only. The actual solar-control area must be confirmed, and real savings depend on orientation, occupancy, HVAC operation, weather, maintenance and energy costs. No financial return or EPC outcome is guaranteed.

Large-scale replacement capability

The right intervention starts with the condition of the existing system.

Sleaford demonstrates the importance of choosing between glass-only reglazing and full window replacement on evidence, not assumption. Dortech Architectural Systems can survey the existing envelope, develop the appropriate system and glass specification, and coordinate manufacture, removal, access and installation across a building-wide programme.

Project detail

See the glazing upgrade in context.

Indicative UK non-domestic energy-cost trend
Indicative UK non-domestic energy-cost trend.
Three benefits of replacing underperforming commercial glass
Three benefits of replacing underperforming commercial glass.
Are ageing windows holding your building back?

Talk to Dortech Architectural Systems about large-scale window and glazing replacement.

We help project teams choose the right level of intervention—from replacement glass within serviceable frames to complete thermally broken aluminium window systems.

Discuss your project